[ad_1]
After I consider Savior Tools I normally consider their wonderful rifle and pistol circumstances, or probably their new capturing mats(when you adopted our SHOT Present Protection). That isn’t the case this time although, after studying about their fishing rod racks earlier final 12 months I needed to check certainly one of them out. So at present I’m reviewing their 36-slot Aluminum Fishing Rod Rack in gunmetal gray. That is the center dimension out there for the Savior Fishing Rod Racks, in addition they provide a smaller 24-slot choice in addition to a bigger 48-slot bigger choice. All three of the fishing rod rack sizes can be found in three colours from Savior Tools, Carbon Black, Gunmetal Gray, and Ocean Blue. Regardless of the dimensions all three are made with the identical building of an extruded aluminum body with abs plastic slip joints and finish caps.
The rod racks are composed of two units of rod helps, they’re adjustable for anglers to set to their rods. For padding the rod assist slots are fabricated from closed-cell EVA foam, defending your rods. The helps use hand screws to be set in place. The vast aluminum base plate makes certain irrespective of the dimensions of the rod or reel type, it’ll nonetheless make strong contact.
Savior Tools Aluminum Fishing Rod Rack – Specs
- Three Sizes – 24 Slot, 36 Slot, and 48 Slot
- Adjustable Rod Assist Beams
- Closed-Cell Foam Cushioned Rod Holders
- Aluminum Body
- ABS Plastic Joints & Caps
- Colours Accessible – Carbon Black, Gunmetal Gray, and Ocean Blue
- 24 Slot Dimensions – 24” x 28.25” x 13”
- 36 Slot Dimensions – 35” x 30.25” x 14.75”
- 48 Slot Dimensions – 46.5” x 30.25” x 14.75”
- Max Peak of High Assist – 28.25”
- Min Peak of Backside Assist – 4.75”
- Comes with Savior Lifetime Guarantee
Savior Tools Aluminum Fishing Rod Rack – First Look
It was fairly run-of-the-mill as first seems go, a Savior Tools field with bagged-up components inside. I do wish to word, there are not any targets printed contained in the field, in contrast to the packing containers for rifle circumstances. Meeting was tremendous easy, no instruments are required, all you want is your two arms and the flexibility to learn. The one factor of word is to ensure the verticle put up orientation is appropriate. Ensure that to observe the directions for them or the helps gained’t slip in correctly. Meeting didn’t take me greater than 10 minutes to place collectively and get the rod helps set simply how I like them
Savior Tools Aluminum Fishing Rod Rack – In Use
I imply it’s a rod rack, so I put my fishing rod combos on it. As within the majority of rod combo I personal, from my smallest trout rod as much as my customized tuna combo with an adjustable aluminum rod butt. With out having to regulate the helps I used to be in a position to have all of the combos keep securely in place. That vast base plate did its job effectively and made certain all of the rods have been involved with it. So after slightly finagling to get all the pieces to suit subsequent to one another, all of them made it on. Even the oddball St. Croix Legend Grasp Swimbait rod with its angled gripped match into this rack.
Whereas the spinning rods undoubtedly did take up lots of house, there’s nonetheless loads of actual property left on the racks. I managed to place 14 rod and reel combos on the 36-slot rack. In the event you needed to there are many slots left to place simply rods on as effectively. Although I do really feel I might in all probability squeeze in a pair extra rod combos if I organized it slightly higher.
Savior Tools Aluminum Fishing Rod Rack – Closing Ideas
After utilizing this rod rack for the previous couple of months I’d say for the cash it’s onerous to beat. Relating to the value the Savior Tools racks sit proper in the course of the pack when in comparison with different aluminum framed rack choices. The rack’s design makes it tremendous straightforward to regulate, together with loads of additional house with a few easy accessibility slots on the ends. Even with all of the out there adjustability, the vast base plate makes it so that you don’t have to regulate an excessive amount of to suit rods on it. Like I mentioned earlier than I’ve my ultralight trout combo on there similtaneously my tuna rods. The end is holding up effectively too, with no marring to be seen but even with the aluminum gimble rod butts. With the ability to match 14 rod and reel combos on a single rack is fairly good contemplating lots of the combos are bigger saltwater combos.
OHUB Assessment: Savior Tools Aluminum Fishing Rod RacksNow that I coated what I favored and was impressed by on the Savior Tools Fishing Rod Rack, I would like to speak about a few issues I really feel might use enchancment. First is the side-to-side play within the vertical helps. I do know that I shouldn’t count on a rock-solid rack contemplating how lots of the rack was simply friction fitted collectively throughout meeting. The ABS plastic joints might use possibly a cross bolt or D-ring to stiffen them up.
The opposite challenge additionally stems from the ABD joint, the friction-fitting lets the verticle posts slip out when you attempt to transfer the rack some with the rods in place. This lets the helps get tousled and take away all the pieces after which reassemble the rod rack to repair this. This once more may very well be solved with a bolt or D-ring within the joint to safe it. There may be yet one more factor I’d prefer to see however this isn’t addressing an issue however extra of a attainable enchancment. The addition of some threaded holes to the underside of the toes on the rack together with the extra providing of some adjustable rubberized toes or casters as improve choices can be nice. A number of garages or storage spots aren’t precisely flat so some toes on threads might assist preserve all the pieces stage.
Total I might undoubtedly suggest this rack to anybody in search of rod storage. I plan on grabbing one other rack sooner or later to place the previous couple of combos and future purchases on. The Savior Rod Rack works nice even with the couple issues I discovered. The bottom plate end is holding up effectively to having heavy aluminum gimbaled rods positioned on it. After which I do know I’m coated for any issues which may spring up sooner or later. Like their different merchandise, the rod racks all include a lifetime guarantee from Savior Tools.
[ad_2]
